pixels[] array. This
* function must always be called before reading from or writing to pixels[].
*
renderers may or may not seem to require loadPixels()
* or updatePixels(). However, the rule is that any time you want to
* manipulate the pixels[] array, you must first call
* loadPixels(), and after changes have been made, call
* updatePixels(). Even if the renderer may not seem to use this
* function in the current Processing release, this will always be subject
* to change.
*
* ( end auto-generated )
*
* Advanced
* Call this when you want to mess with the pixels[] array.
*
* For subclasses where the pixels[] buffer isn't set by default,
* this should copy all data into the pixels[] array
*
* @webref pimage:pixels
* @brief Loads the pixel data for the image into its pixels[] array
* @usage web_application
*/
public void loadPixels() { // ignore
if (pixels == null || pixels.length != pixelWidth*pixelHeight) {
pixels = new int[pixelWidth*pixelHeight];
}
setLoaded();
}
public void updatePixels() { // ignore
updatePixels(0, 0, pixelWidth, pixelHeight);
}
/**
* ( begin auto-generated from PImage_updatePixels.xml )
*
* Updates the image with the data in its pixels[] array. Use in
* conjunction with loadPixels(). If you're only reading pixels from
* the array, there's no need to call updatePixels().
*
renderers may or may not seem to require loadPixels()
* or updatePixels(). However, the rule is that any time you want to
* manipulate the pixels[] array, you must first call
* loadPixels(), and after changes have been made, call
* updatePixels(). Even if the renderer may not seem to use this
* function in the current Processing release, this will always be subject
* to change.
*
* Currently, none of the renderers use the additional parameters to
* updatePixels(), however this may be implemented in the future.
*
* ( end auto-generated )
* Advanced
* Mark the pixels in this region as needing an update.
* This is not currently used by any of the renderers, however the api
* is structured this way in the hope of being able to use this to
* speed things up in the future.
* @webref pimage:pixels
* @brief Updates the image with the data in its pixels[] array
* @usage web_application
* @param x x-coordinate of the upper-left corner
* @param y y-coordinate of the upper-left corner
* @param w width
* @param h height
*/
public void updatePixels(int x, int y, int w, int h) { // ignore
int x2 = x + w;
int y2 = y + h;
if (!modified) {
mx1 = PApplet.max(0, x);
mx2 = PApplet.min(pixelWidth, x2);
my1 = PApplet.max(0, y);
my2 = PApplet.min(pixelHeight, y2);
modified = true;
} else {
if (x < mx1) mx1 = PApplet.max(0, x);
if (x > mx2) mx2 = PApplet.min(pixelWidth, x);
if (y < my1) my1 = PApplet.max(0, y);
if (y > my2) my2 = PApplet.min(pixelHeight, y);
if (x2 < mx1) mx1 = PApplet.max(0, x2);
if (x2 > mx2) mx2 = PApplet.min(pixelWidth, x2);
if (y2 < my1) my1 = PApplet.max(0, y2);
if (y2 > my2) my2 = PApplet.min(pixelHeight, y2);
}
}
//////////////////////////////////////////////////////////////
// COPYING IMAGE DATA
/**
* Duplicate an image, returns new PImage object.
* The pixels[] array for the new object will be unique
* and recopied from the source image. This is implemented as an
* override of Object.clone(). We recommend using get() instead,
* because it prevents you from needing to catch the
* CloneNotSupportedException, and from doing a cast from the result.
*/
@Override
public Object clone() throws CloneNotSupportedException { // ignore
return get();
}
/**
* ( begin auto-generated from PImage_resize.xml )
*
* Resize the image to a new width and height. To make the image scale
* proportionally, use 0 as the value for the wide or high
* parameter. For instance, to make the width of an image 150 pixels, and
* change the height using the same proportion, use resize(150, 0).
*
* Even though a PGraphics is technically a PImage, it is not possible to
* rescale the image data found in a PGraphics. (It's simply not possible
* to do this consistently across renderers: technically infeasible with
* P3D, or what would it even do with PDF?) If you want to resize PGraphics
* content, first get a copy of its image data using the get()
* method, and call resize() on the PImage that is returned.
*
* ( end auto-generated )
* @webref pimage:method
* @brief Changes the size of an image to a new width and height
* @usage web_application
* @param w the resized image width
* @param h the resized image height
* @see PImage#get(int, int, int, int)
*/
public void resize(int w, int h) { // ignore
if (w <= 0 && h <= 0) {
throw new IllegalArgumentException("width or height must be > 0 for resize");
}
if (w == 0) { // Use height to determine relative size
float diff = (float) h / (float) height;
w = (int) (width * diff);
} else if (h == 0) { // Use the width to determine relative size
float diff = (float) w / (float) width;
h = (int) (height * diff);
}
BufferedImage img =
shrinkImage((BufferedImage) getNative(), w*pixelDensity, h*pixelDensity);
PImage temp = new PImage(img);
this.pixelWidth = temp.width;
this.pixelHeight = temp.height;
// Get the resized pixel array
this.pixels = temp.pixels;
this.width = pixelWidth / pixelDensity;
this.height = pixelHeight / pixelDensity;
// Mark the pixels array as altered
updatePixels();
}
// Adapted from getFasterScaledInstance() method from page 111 of
// "Filthy Rich Clients" by Chet Haase and Romain Guy
// Additional modifications and simplifications have been added,
// plus a fix to deal with an infinite loop if images are expanded.
// http://code.google.com/p/processing/issues/detail?id=1463
static private BufferedImage shrinkImage(BufferedImage img,
int targetWidth, int targetHeight) {
int type = (img.getTransparency() == Transparency.OPAQUE) ?
BufferedImage.TYPE_INT_RGB : BufferedImage.TYPE_INT_ARGB;
BufferedImage outgoing = img;
BufferedImage scratchImage = null;
Graphics2D g2 = null;
int prevW = outgoing.getWidth();
int prevH = outgoing.getHeight();
boolean isTranslucent = img.getTransparency() != Transparency.OPAQUE;
// Use multi-step technique: start with original size, then scale down in
// multiple passes with drawImage() until the target size is reached
int w = img.getWidth();
int h = img.getHeight();
do {
if (w > targetWidth) {
w /= 2;
// if this is the last step, do the exact size
if (w < targetWidth) {
w = targetWidth;
}
} else if (targetWidth >= w) {
w = targetWidth;
}
if (h > targetHeight) {
h /= 2;
if (h < targetHeight) {
h = targetHeight;
}
} else if (targetHeight >= h) {
h = targetHeight;
}
if (scratchImage == null || isTranslucent) {
// Use a single scratch buffer for all iterations and then copy
// to the final, correctly-sized image before returning
scratchImage = new BufferedImage(w, h, type);
g2 = scratchImage.createGraphics();
}
g2.setRenderingHint(RenderingHints.KEY_INTERPOLATION,
RenderingHints.VALUE_INTERPOLATION_BILINEAR);
g2.drawImage(outgoing, 0, 0, w, h, 0, 0, prevW, prevH, null);
prevW = w;
prevH = h;
outgoing = scratchImage;
} while (w != targetWidth || h != targetHeight);
if (g2 != null) {
g2.dispose();
}
// If we used a scratch buffer that is larger than our target size,
// create an image of the right size and copy the results into it
if (targetWidth != outgoing.getWidth() ||
targetHeight != outgoing.getHeight()) {
scratchImage = new BufferedImage(targetWidth, targetHeight, type);
g2 = scratchImage.createGraphics();
g2.drawImage(outgoing, 0, 0, null);
g2.dispose();
outgoing = scratchImage;
}
return outgoing;
}
//////////////////////////////////////////////////////////////
// MARKING IMAGE AS LOADED / FOR USE IN RENDERERS
public boolean isLoaded() { // ignore
return loaded;
}
public void setLoaded() { // ignore
loaded = true;
}
public void setLoaded(boolean l) { // ignore
loaded = l;
}
//////////////////////////////////////////////////////////////
// GET/SET PIXELS
/**
* ( begin auto-generated from PImage_get.xml )
*
* Reads the color of any pixel or grabs a section of an image. If no
* parameters are specified, the entire image is returned. Use the x
* and y parameters to get the value of one pixel. Get a section of
* the display window by specifying an additional width and
* height parameter. When getting an image, the x and
* y parameters define the coordinates for the upper-left corner of
* the image, regardless of the current imageMode().
*
* If the pixel requested is outside of the image window, black is
* returned. The numbers returned are scaled according to the current color
* ranges, but only RGB values are returned by this function. For example,
* even though you may have drawn a shape with colorMode(HSB), the
* numbers returned will be in RGB format.
*
* Getting the color of a single pixel with get(x, y) is easy, but
* not as fast as grabbing the data directly from pixels[]. The
* equivalent statement to get(x, y) using pixels[] is
* pixels[y*width+x]. See the reference for pixels[] for more information.
*
* ( end auto-generated )
*
* Advanced
* Returns an ARGB "color" type (a packed 32 bit int with the color.
* If the coordinate is outside the image, zero is returned
* (black, but completely transparent).
*
* If the image is in RGB format (i.e. on a PVideo object),
* the value will get its high bits set, just to avoid cases where
* they haven't been set already.
*
* If the image is in ALPHA format, this returns a white with its
* alpha value set.
*
* This function is included primarily for beginners. It is quite
* slow because it has to check to see if the x, y that was provided
* is inside the bounds, and then has to check to see what image
* type it is. If you want things to be more efficient, access the
* pixels[] array directly.
*
* @webref image:pixels
* @brief Reads the color of any pixel or grabs a rectangle of pixels
* @usage web_application
* @param x x-coordinate of the pixel
* @param y y-coordinate of the pixel
* @see PApplet#set(int, int, int)
* @see PApplet#pixels
* @see PApplet#copy(PImage, int, int, int, int, int, int, int, int)
*/
public int get(int x, int y) {
if ((x < 0) || (y < 0) || (x >= pixelWidth) || (y >= pixelHeight)) return 0;
switch (format) {
case RGB:
return pixels[y*pixelWidth + x] | 0xff000000;
case ARGB:
return pixels[y*pixelWidth + x];
case ALPHA:
return (pixels[y*pixelWidth + x] << 24) | 0xffffff;
}
return 0;
}
/**
* @param w width of pixel rectangle to get
* @param h height of pixel rectangle to get
*/
public PImage get(int x, int y, int w, int h) {
int targetX = 0;
int targetY = 0;
int targetWidth = w;
int targetHeight = h;
boolean cropped = false;
if (x < 0) {
w += x; // x is negative, removes the left edge from the width
targetX = -x;
cropped = true;
x = 0;
}
if (y < 0) {
h += y; // y is negative, clip the number of rows
targetY = -y;
cropped = true;
y = 0;
}
if (x + w > pixelWidth) {
w = pixelWidth - x;
cropped = true;
}
if (y + h > pixelHeight) {
h = pixelHeight - y;
cropped = true;
}
if (w < 0) {
w = 0;
}
if (h < 0) {
h = 0;
}
int targetFormat = format;
if (cropped && format == RGB) {
targetFormat = ARGB;
}
PImage target = new PImage(targetWidth / pixelDensity,
targetHeight / pixelDensity,
targetFormat, pixelDensity);
target.parent = parent; // parent may be null so can't use createImage()
if (w > 0 && h > 0) {
getImpl(x, y, w, h, target, targetX, targetY);
}
return target;
}
/**
* Returns a copy of this PImage. Equivalent to get(0, 0, width, height).
* Deprecated, just use copy() instead.
*/
public PImage get() {
// Formerly this used clone(), which caused memory problems.
// http://code.google.com/p/processing/issues/detail?id=42
return get(0, 0, pixelWidth, pixelHeight);
}
public PImage copy() {
return get(0, 0, pixelWidth, pixelHeight);
}
/**
* Internal function to actually handle getting a block of pixels that
* has already been properly cropped to a valid region. That is, x/y/w/h
* are guaranteed to be inside the image space, so the implementation can
* use the fastest possible pixel copying method.
*/
protected void getImpl(int sourceX, int sourceY,
int sourceWidth, int sourceHeight,
PImage target, int targetX, int targetY) {
int sourceIndex = sourceY*pixelWidth + sourceX;
int targetIndex = targetY*target.pixelWidth + targetX;
for (int row = 0; row < sourceHeight; row++) {
System.arraycopy(pixels, sourceIndex, target.pixels, targetIndex, sourceWidth);
sourceIndex += pixelWidth;
targetIndex += target.pixelWidth;
}
}
/**
* ( begin auto-generated from PImage_set.xml )
*
* Changes the color of any pixel or writes an image directly into the
* display window.
*
* The x and y parameters specify the pixel to change and the
* color parameter specifies the color value. The color parameter is
* affected by the current color mode (the default is RGB values from 0 to
* 255). When setting an image, the x and y parameters define
* the coordinates for the upper-left corner of the image, regardless of
* the current imageMode().
*
* Setting the color of a single pixel with set(x, y) is easy, but
* not as fast as putting the data directly into pixels[]. The
* equivalent statement to set(x, y, #000000) using pixels[]
* is pixels[y*width+x] = #000000. See the reference for
* pixels[] for more information.
*
* ( end auto-generated )
*
* @webref image:pixels
* @brief writes a color to any pixel or writes an image into another
* @usage web_application
* @param x x-coordinate of the pixel
* @param y y-coordinate of the pixel
* @param c any value of the color datatype
* @see PImage#get(int, int, int, int)
* @see PImage#pixels
* @see PImage#copy(PImage, int, int, int, int, int, int, int, int)
*/
public void set(int x, int y, int c) {
if ((x < 0) || (y < 0) || (x >= pixelWidth) || (y >= pixelHeight)) return;
pixels[y*pixelWidth + x] = c;
updatePixels(x, y, 1, 1); // slow...
}
/**
*
Advanced
* Efficient method of drawing an image's pixels directly to this surface.
* No variations are employed, meaning that any scale, tint, or imageMode
* settings will be ignored.
*
* @param img image to copy into the original image
*/
public void set(int x, int y, PImage img) {
int sx = 0;
int sy = 0;
int sw = img.pixelWidth;
int sh = img.pixelHeight;
if (x < 0) { // off left edge
sx -= x;
sw += x;
x = 0;
}
if (y < 0) { // off top edge
sy -= y;
sh += y;
y = 0;
}
if (x + sw > pixelWidth) { // off right edge
sw = pixelWidth - x;
}
if (y + sh > pixelHeight) { // off bottom edge
sh = pixelHeight - y;
}
// this could be nonexistent
if ((sw <= 0) || (sh <= 0)) return;
setImpl(img, sx, sy, sw, sh, x, y);
}
/**
* Internal function to actually handle setting a block of pixels that
* has already been properly cropped from the image to a valid region.
*/
protected void setImpl(PImage sourceImage,
int sourceX, int sourceY,
int sourceWidth, int sourceHeight,
int targetX, int targetY) {
int sourceOffset = sourceY * sourceImage.pixelWidth + sourceX;
int targetOffset = targetY * pixelWidth + targetX;
for (int y = sourceY; y < sourceY + sourceHeight; y++) {
System.arraycopy(sourceImage.pixels, sourceOffset, pixels, targetOffset, sourceWidth);
sourceOffset += sourceImage.pixelWidth;
targetOffset += pixelWidth;
}
//updatePixelsImpl(targetX, targetY, sourceWidth, sourceHeight);
updatePixels(targetX, targetY, sourceWidth, sourceHeight);
}
//////////////////////////////////////////////////////////////
// ALPHA CHANNEL
@Deprecated
/**
* @param maskArray array of integers used as the alpha channel, needs to be
* the same length as the image's pixel array.
*/
public void mask(int maskArray[]) { // ignore
loadPixels();
// don't execute if mask image is different size
if (maskArray.length != pixels.length) {
throw new IllegalArgumentException("mask() can only be used with an image that's the same size.");
}
for (int i = 0; i < pixels.length; i++) {
pixels[i] = ((maskArray[i] & 0xff) << 24) | (pixels[i] & 0xffffff);
}
format = ARGB;
updatePixels();
}
/**
* ( begin auto-generated from PImage_mask.xml )
*
* Masks part of an image from displaying by loading another image and
* using it as an alpha channel. This mask image should only contain
* grayscale data, but only the blue color channel is used. The mask image
* needs to be the same size as the image to which it is applied.
*
* In addition to using a mask image, an integer array containing the alpha
* channel data can be specified directly. This method is useful for
* creating dynamically generated alpha masks. This array must be of the
* same length as the target image's pixels array and should contain only
* grayscale data of values between 0-255.
*
* ( end auto-generated )
*
* Advanced
*
* Set alpha channel for an image. Black colors in the source
* image will make the destination image completely transparent,
* and white will make things fully opaque. Gray values will
* be in-between steps.
*
* Strictly speaking the "blue" value from the source image is
* used as the alpha color. For a fully grayscale image, this
* is correct, but for a color image it's not 100% accurate.
* For a more accurate conversion, first use filter(GRAY)
* which will make the image into a "correct" grayscale by
* performing a proper luminance-based conversion.
*
* @webref pimage:method
* @usage web_application
* @param img image to use as the mask
* @brief Masks part of an image with another image as an alpha channel
*/
public void mask(PImage img) {
img.loadPixels();
mask(img.pixels);
}
//////////////////////////////////////////////////////////////
// IMAGE FILTERS
public void filter(int kind) {
loadPixels();
switch (kind) {
case BLUR:
// TODO write basic low-pass filter blur here
// what does photoshop do on the edges with this guy?
// better yet.. why bother? just use gaussian with radius 1
filter(BLUR, 1);
break;
case GRAY:
if (format == ALPHA) {
// for an alpha image, convert it to an opaque grayscale
for (int i = 0; i < pixels.length; i++) {
int col = 255 - pixels[i];
pixels[i] = 0xff000000 | (col << 16) | (col << 8) | col;
}
format = RGB;
} else {
// Converts RGB image data into grayscale using
// weighted RGB components, and keeps alpha channel intact.
// [toxi 040115]
for (int i = 0; i < pixels.length; i++) {
int col = pixels[i];
// luminance = 0.3*red + 0.59*green + 0.11*blue
// 0.30 * 256 = 77
// 0.59 * 256 = 151
// 0.11 * 256 = 28
int lum = (77*(col>>16&0xff) + 151*(col>>8&0xff) + 28*(col&0xff))>>8;
pixels[i] = (col & ALPHA_MASK) | lum<<16 | lum<<8 | lum;
}
}
break;
case INVERT:
for (int i = 0; i < pixels.length; i++) {
//pixels[i] = 0xff000000 |
pixels[i] ^= 0xffffff;
}
break;
case POSTERIZE:
throw new RuntimeException("Use filter(POSTERIZE, int levels) " +
"instead of filter(POSTERIZE)");
case OPAQUE:
for (int i = 0; i < pixels.length; i++) {
pixels[i] |= 0xff000000;
}
format = RGB;
break;
case THRESHOLD:
filter(THRESHOLD, 0.5f);
break;
// [toxi 050728] added new filters
case ERODE:
erode(); // former dilate(true);
break;
case DILATE:
dilate(); // former dilate(false);
break;
}
updatePixels(); // mark as modified
}
/**
* ( begin auto-generated from PImage_filter.xml )
*
* Filters an image as defined by one of the following modes:
THRESHOLD - converts the image to black and white pixels depending if
* they are above or below the threshold defined by the level parameter.
* The level must be between 0.0 (black) and 1.0(white). If no level is
* specified, 0.5 is used.
*
* GRAY - converts any colors in the image to grayscale equivalents
*
* INVERT - sets each pixel to its inverse value
*
* POSTERIZE - limits each channel of the image to the number of colors
* specified as the level parameter
*
* BLUR - executes a Guassian blur with the level parameter specifying the
* extent of the blurring. If no level parameter is used, the blur is
* equivalent to Guassian blur of radius 1
*
* OPAQUE - sets the alpha channel to entirely opaque
*
* ERODE - reduces the light areas with the amount defined by the level
* parameter
*
* DILATE - increases the light areas with the amount defined by the level parameter
*
* ( end auto-generated )
*
*
Advanced
* Method to apply a variety of basic filters to this image.
*
*
* - filter(BLUR) provides a basic blur.
*
- filter(GRAY) converts the image to grayscale based on luminance.
*
- filter(INVERT) will invert the color components in the image.
*
- filter(OPAQUE) set all the high bits in the image to opaque
*
- filter(THRESHOLD) converts the image to black and white.
*
- filter(DILATE) grow white/light areas
*
- filter(ERODE) shrink white/light areas
*
* Luminance conversion code contributed by
* toxi
*
* Gaussian blur code contributed by
* Mario Klingemann
*
* @webref image:pixels
* @brief Converts the image to grayscale or black and white
* @usage web_application
* @param kind Either THRESHOLD, GRAY, OPAQUE, INVERT, POSTERIZE, BLUR, ERODE, or DILATE
* @param param unique for each, see above
*/
public void filter(int kind, float param) {
loadPixels();
switch (kind) {
case BLUR:
if (format == ALPHA)
blurAlpha(param);
else if (format == ARGB)
blurARGB(param);
else
blurRGB(param);
break;
case GRAY:
throw new RuntimeException("Use filter(GRAY) instead of " +
"filter(GRAY, param)");
case INVERT:
throw new RuntimeException("Use filter(INVERT) instead of " +
"filter(INVERT, param)");
case OPAQUE:
throw new RuntimeException("Use filter(OPAQUE) instead of " +
"filter(OPAQUE, param)");
case POSTERIZE:
int levels = (int)param;
if ((levels < 2) || (levels > 255)) {
throw new RuntimeException("Levels must be between 2 and 255 for " +
"filter(POSTERIZE, levels)");
}
int levels1 = levels - 1;
for (int i = 0; i < pixels.length; i++) {
int rlevel = (pixels[i] >> 16) & 0xff;
int glevel = (pixels[i] >> 8) & 0xff;
int blevel = pixels[i] & 0xff;
rlevel = (((rlevel * levels) >> 8) * 255) / levels1;
glevel = (((glevel * levels) >> 8) * 255) / levels1;
blevel = (((blevel * levels) >> 8) * 255) / levels1;
pixels[i] = ((0xff000000 & pixels[i]) |
(rlevel << 16) |
(glevel << 8) |
blevel);
}
break;
case THRESHOLD: // greater than or equal to the threshold
int thresh = (int) (param * 255);
for (int i = 0; i < pixels.length; i++) {
int max = Math.max((pixels[i] & RED_MASK) >> 16,
Math.max((pixels[i] & GREEN_MASK) >> 8,
(pixels[i] & BLUE_MASK)));
pixels[i] = (pixels[i] & ALPHA_MASK) |
((max < thresh) ? 0x000000 : 0xffffff);
}
break;
// [toxi20050728] added new filters
case ERODE:
throw new RuntimeException("Use filter(ERODE) instead of " +
"filter(ERODE, param)");
case DILATE:
throw new RuntimeException("Use filter(DILATE) instead of " +
"filter(DILATE, param)");
}
updatePixels(); // mark as modified
}
/** Set the high bits of all pixels to opaque. */
protected void opaque() {
for (int i = 0; i < pixels.length; i++) {
pixels[i] = 0xFF000000 | pixels[i];
}
}
/**
* Optimized code for building the blur kernel.
* further optimized blur code (approx. 15% for radius=20)
* bigger speed gains for larger radii (~30%)
* added support for various image types (ALPHA, RGB, ARGB)
* [toxi 050728]
*/
protected void buildBlurKernel(float r) {
int radius = (int) (r * 3.5f);
radius = (radius < 1) ? 1 : ((radius < 248) ? radius : 248);
if (blurRadius != radius) {
blurRadius = radius;
blurKernelSize = 1 + blurRadius<<1;
blurKernel = new int[blurKernelSize];
blurMult = new int[blurKernelSize][256];
int bk,bki;
int[] bm,bmi;
for (int i = 1, radiusi = radius - 1; i < radius; i++) {
blurKernel[radius+i] = blurKernel[radiusi] = bki = radiusi * radiusi;
bm=blurMult[radius+i];
bmi=blurMult[radiusi--];
for (int j = 0; j < 256; j++)
bm[j] = bmi[j] = bki*j;
}
bk = blurKernel[radius] = radius * radius;
bm = blurMult[radius];
for (int j = 0; j < 256; j++)
bm[j] = bk*j;
}
}
protected void blurAlpha(float r) {
int sum, cb;
int read, ri, ym, ymi, bk0;
int b2[] = new int[pixels.length];
int yi = 0;
buildBlurKernel(r);
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
//cb = cg = cr = sum = 0;
cb = sum = 0;
read = x - blurRadius;
if (read<0) {
bk0=-read;
read=0;
} else {
if (read >= pixelWidth)
break;
bk0=0;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (read >= pixelWidth)
break;
int c = pixels[read + yi];
int[] bm = blurMult[i];
cb += bm[c & BLUE_MASK];
sum += blurKernel[i];
read++;
}
ri = yi + x;
b2[ri] = cb / sum;
}
yi += pixelWidth;
}
yi = 0;
ym = -blurRadius;
ymi = ym * pixelWidth;
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
cb = sum = 0;
if (ym < 0) {
bk0 = ri = -ym;
read = x;
} else {
if (ym >= pixelHeight)
break;
bk0 = 0;
ri = ym;
read = x + ymi;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (ri >= pixelHeight)
break;
int[] bm = blurMult[i];
cb += bm[b2[read]];
sum += blurKernel[i];
ri++;
read += pixelWidth;
}
pixels[x+yi] = (cb/sum);
}
yi += pixelWidth;
ymi += pixelWidth;
ym++;
}
}
protected void blurRGB(float r) {
int sum, cr, cg, cb; //, k;
int /*pixel,*/ read, ri, /*roff,*/ ym, ymi, /*riw,*/ bk0;
int r2[] = new int[pixels.length];
int g2[] = new int[pixels.length];
int b2[] = new int[pixels.length];
int yi = 0;
buildBlurKernel(r);
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
cb = cg = cr = sum = 0;
read = x - blurRadius;
if (read < 0) {
bk0 = -read;
read = 0;
} else {
if (read >= pixelWidth) {
break;
}
bk0 = 0;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (read >= pixelWidth) {
break;
}
int c = pixels[read + yi];
int[] bm = blurMult[i];
cr += bm[(c & RED_MASK) >> 16];
cg += bm[(c & GREEN_MASK) >> 8];
cb += bm[c & BLUE_MASK];
sum += blurKernel[i];
read++;
}
ri = yi + x;
r2[ri] = cr / sum;
g2[ri] = cg / sum;
b2[ri] = cb / sum;
}
yi += pixelWidth;
}
yi = 0;
ym = -blurRadius;
ymi = ym * pixelWidth;
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
cb = cg = cr = sum = 0;
if (ym < 0) {
bk0 = ri = -ym;
read = x;
} else {
if (ym >= pixelHeight) {
break;
}
bk0 = 0;
ri = ym;
read = x + ymi;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (ri >= pixelHeight) {
break;
}
int[] bm = blurMult[i];
cr += bm[r2[read]];
cg += bm[g2[read]];
cb += bm[b2[read]];
sum += blurKernel[i];
ri++;
read += pixelWidth;
}
pixels[x+yi] = 0xff000000 | (cr/sum)<<16 | (cg/sum)<<8 | (cb/sum);
}
yi += pixelWidth;
ymi += pixelWidth;
ym++;
}
}
protected void blurARGB(float r) {
int sum, cr, cg, cb, ca;
int /*pixel,*/ read, ri, /*roff,*/ ym, ymi, /*riw,*/ bk0;
int wh = pixels.length;
int r2[] = new int[wh];
int g2[] = new int[wh];
int b2[] = new int[wh];
int a2[] = new int[wh];
int yi = 0;
buildBlurKernel(r);
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
cb = cg = cr = ca = sum = 0;
read = x - blurRadius;
if (read < 0) {
bk0 = -read;
read = 0;
} else {
if (read >= pixelWidth) {
break;
}
bk0=0;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (read >= pixelWidth) {
break;
}
int c = pixels[read + yi];
int[] bm=blurMult[i];
ca += bm[(c & ALPHA_MASK) >>> 24];
cr += bm[(c & RED_MASK) >> 16];
cg += bm[(c & GREEN_MASK) >> 8];
cb += bm[c & BLUE_MASK];
sum += blurKernel[i];
read++;
}
ri = yi + x;
a2[ri] = ca / sum;
r2[ri] = cr / sum;
g2[ri] = cg / sum;
b2[ri] = cb / sum;
}
yi += pixelWidth;
}
yi = 0;
ym = -blurRadius;
ymi = ym * pixelWidth;
for (int y = 0; y < pixelHeight; y++) {
for (int x = 0; x < pixelWidth; x++) {
cb = cg = cr = ca = sum = 0;
if (ym < 0) {
bk0 = ri = -ym;
read = x;
} else {
if (ym >= pixelHeight) {
break;
}
bk0 = 0;
ri = ym;
read = x + ymi;
}
for (int i = bk0; i < blurKernelSize; i++) {
if (ri >= pixelHeight) {
break;
}
int[] bm=blurMult[i];
ca += bm[a2[read]];
cr += bm[r2[read]];
cg += bm[g2[read]];
cb += bm[b2[read]];
sum += blurKernel[i];
ri++;
read += pixelWidth;
}
pixels[x+yi] = (ca/sum)<<24 | (cr/sum)<<16 | (cg/sum)<<8 | (cb/sum);
}
yi += pixelWidth;
ymi += pixelWidth;
ym++;
}
}
/**
* Generic dilate/erode filter using luminance values
* as decision factor. [toxi 050728]
*/
protected void dilate() { // formerly dilate(false)
int index = 0;
int maxIndex = pixels.length;
int[] outgoing = new int[maxIndex];
// erosion (grow light areas)
while (index < maxIndex) {
int curRowIndex = index;
int maxRowIndex = index + pixelWidth;
while (index < maxRowIndex) {
int orig = pixels[index];
int result = orig;
int idxLeft = index - 1;
int idxRight = index + 1;
int idxUp = index - pixelWidth;
int idxDown = index + pixelWidth;
if (idxLeft < curRowIndex) {
idxLeft = index;
}
if (idxRight >= maxRowIndex) {
idxRight = index;
}
if (idxUp < 0) {
idxUp = index;
}
if (idxDown >= maxIndex) {
idxDown = index;
}
int colUp = pixels[idxUp];
int colLeft = pixels[idxLeft];
int colDown = pixels[idxDown];
int colRight = pixels[idxRight];
// compute luminance
int currLum =
77*(orig>>16&0xff) + 151*(orig>>8&0xff) + 28*(orig&0xff);
int lumLeft =
77*(colLeft>>16&0xff) + 151*(colLeft>>8&0xff) + 28*(colLeft&0xff);
int lumRight =
77*(colRight>>16&0xff) + 151*(colRight>>8&0xff) + 28*(colRight&0xff);
int lumUp =
77*(colUp>>16&0xff) + 151*(colUp>>8&0xff) + 28*(colUp&0xff);
int lumDown =
77*(colDown>>16&0xff) + 151*(colDown>>8&0xff) + 28*(colDown&0xff);
if (lumLeft > currLum) {
result = colLeft;
currLum = lumLeft;
}
if (lumRight > currLum) {
result = colRight;
currLum = lumRight;
}
if (lumUp > currLum) {
result = colUp;
currLum = lumUp;
}
if (lumDown > currLum) {
result = colDown;
currLum = lumDown;
}
outgoing[index++] = result;
}
}
System.arraycopy(outgoing, 0, pixels, 0, maxIndex);
}
protected void erode() { // formerly dilate(true)
int index = 0;
int maxIndex = pixels.length;
int[] outgoing = new int[maxIndex];
// dilate (grow dark areas)
while (index < maxIndex) {
int curRowIndex = index;
int maxRowIndex = index + pixelWidth;
while (index < maxRowIndex) {
int orig = pixels[index];
int result = orig;
int idxLeft = index - 1;
int idxRight = index + 1;
int idxUp = index - pixelWidth;
int idxDown = index + pixelWidth;
if (idxLeft < curRowIndex) {
idxLeft = index;
}
if (idxRight >= maxRowIndex) {
idxRight = index;
}
if (idxUp < 0) {
idxUp = index;
}
if (idxDown >= maxIndex) {
idxDown = index;
}
int colUp = pixels[idxUp];
int colLeft = pixels[idxLeft];
int colDown = pixels[idxDown];
int colRight = pixels[idxRight];
// compute luminance
int currLum =
77*(orig>>16&0xff) + 151*(orig>>8&0xff) + 28*(orig&0xff);
int lumLeft =
77*(colLeft>>16&0xff) + 151*(colLeft>>8&0xff) + 28*(colLeft&0xff);
int lumRight =
77*(colRight>>16&0xff) + 151*(colRight>>8&0xff) + 28*(colRight&0xff);
int lumUp =
77*(colUp>>16&0xff) + 151*(colUp>>8&0xff) + 28*(colUp&0xff);
int lumDown =
77*(colDown>>16&0xff) + 151*(colDown>>8&0xff) + 28*(colDown&0xff);
if (lumLeft < currLum) {
result = colLeft;
currLum = lumLeft;
}
if (lumRight < currLum) {
result = colRight;
currLum = lumRight;
}
if (lumUp < currLum) {
result = colUp;
currLum = lumUp;
}
if (lumDown < currLum) {
result = colDown;
currLum = lumDown;
}
outgoing[index++] = result;
}
}
System.arraycopy(outgoing, 0, pixels, 0, maxIndex);
}
//////////////////////////////////////////////////////////////
// COPY
/**
* ( begin auto-generated from PImage_copy.xml )
*
* Copies a region of pixels from one image into another. If the source and
* destination regions aren't the same size, it will automatically resize
* source pixels to fit the specified target region. No alpha information
* is used in the process, however if the source image has an alpha channel
* set, it will be copied as well.
*
* As of release 0149, this function ignores imageMode().
*
* ( end auto-generated )
*
* @webref image:pixels
* @brief Copies the entire image
* @usage web_application
* @param sx X coordinate of the source's upper left corner
* @param sy Y coordinate of the source's upper left corner
* @param sw source image width
* @param sh source image height
* @param dx X coordinate of the destination's upper left corner
* @param dy Y coordinate of the destination's upper left corner
* @param dw destination image width
* @param dh destination image height
* @see PGraphics#alpha(int)
* @see PImage#blend(PImage, int, int, int, int, int, int, int, int, int)
*/
public void copy(int sx, int sy, int sw, int sh,
int dx, int dy, int dw, int dh) {
blend(this, sx, sy, sw, sh, dx, dy, dw, dh, REPLACE);
}
/**
* @param src an image variable referring to the source image.
*/
public void copy(PImage src,
int sx, int sy, int sw, int sh,
int dx, int dy, int dw, int dh) {
blend(src, sx, sy, sw, sh, dx, dy, dw, dh, REPLACE);
}
//////////////////////////////////////////////////////////////
// BLEND
/**
* ( begin auto-generated from blendColor.xml )
*
* Blends two color values together based on the blending mode given as the
* MODE parameter. The possible modes are described in the reference
* for the blend() function.
*
* ( end auto-generated )
* Advanced
*
* - REPLACE - destination colour equals colour of source pixel: C = A.
* Sometimes called "Normal" or "Copy" in other software.
*
*
- BLEND - linear interpolation of colours:
* C = A*factor + B
*
*
- ADD - additive blending with white clip:
* C = min(A*factor + B, 255).
* Clipped to 0..255, Photoshop calls this "Linear Burn",
* and Director calls it "Add Pin".
*
*
- SUBTRACT - substractive blend with black clip:
* C = max(B - A*factor, 0).
* Clipped to 0..255, Photoshop calls this "Linear Dodge",
* and Director calls it "Subtract Pin".
*
*
- DARKEST - only the darkest colour succeeds:
* C = min(A*factor, B).
* Illustrator calls this "Darken".
*
*
- LIGHTEST - only the lightest colour succeeds:
* C = max(A*factor, B).
* Illustrator calls this "Lighten".
*
*
- DIFFERENCE - subtract colors from underlying image.
*
*
- EXCLUSION - similar to DIFFERENCE, but less extreme.
*
*
- MULTIPLY - Multiply the colors, result will always be darker.
*
*
- SCREEN - Opposite multiply, uses inverse values of the colors.
*
*
- OVERLAY - A mix of MULTIPLY and SCREEN. Multiplies dark values,
* and screens light values.
*
*
- HARD_LIGHT - SCREEN when greater than 50% gray, MULTIPLY when lower.
*
*
- SOFT_LIGHT - Mix of DARKEST and LIGHTEST.
* Works like OVERLAY, but not as harsh.
*
*
- DODGE - Lightens light tones and increases contrast, ignores darks.
* Called "Color Dodge" in Illustrator and Photoshop.
*
*
- BURN - Darker areas are applied, increasing contrast, ignores lights.
* Called "Color Burn" in Illustrator and Photoshop.
*
* A useful reference for blending modes and their algorithms can be
* found in the SVG
* specification.
* It is important to note that Processing uses "fast" code, not
* necessarily "correct" code. No biggie, most software does. A nitpicker
* can find numerous "off by 1 division" problems in the blend code where
* >>8 or >>7 is used when strictly speaking
* /255.0 or /127.0 should have been used.
* For instance, exclusion (not intended for real-time use) reads
* r1 + r2 - ((2 * r1 * r2) / 255) because 255 == 1.0
* not 256 == 1.0. In other words, (255*255)>>8 is not
* the same as (255*255)/255. But for real-time use the shifts
* are preferrable, and the difference is insignificant for applications
* built with Processing.
*
* @webref color:creating_reading
* @usage web_application
* @param c1 the first color to blend
* @param c2 the second color to blend
* @param mode either BLEND, ADD, SUBTRACT, DARKEST, LIGHTEST, DIFFERENCE, EXCLUSION, MULTIPLY, SCREEN, OVERLAY, HARD_LIGHT, SOFT_LIGHT, DODGE, or BURN
* @see PImage#blend(PImage, int, int, int, int, int, int, int, int, int)
* @see PApplet#color(float, float, float, float)
*/
static public int blendColor(int c1, int c2, int mode) { // ignore
switch (mode) {
case REPLACE: return c2;
case BLEND: return blend_blend(c1, c2);
case ADD: return blend_add_pin(c1, c2);
case SUBTRACT: return blend_sub_pin(c1, c2);
case LIGHTEST: return blend_lightest(c1, c2);
case DARKEST: return blend_darkest(c1, c2);
case DIFFERENCE: return blend_difference(c1, c2);
case EXCLUSION: return blend_exclusion(c1, c2);
case MULTIPLY: return blend_multiply(c1, c2);
case SCREEN: return blend_screen(c1, c2);
case HARD_LIGHT: return blend_hard_light(c1, c2);
case SOFT_LIGHT: return blend_soft_light(c1, c2);
case OVERLAY: return blend_overlay(c1, c2);
case DODGE: return blend_dodge(c1, c2);
case BURN: return blend_burn(c1, c2);
}
return 0;
}
public void blend(int sx, int sy, int sw, int sh,
int dx, int dy, int dw, int dh, int mode) {
blend(this, sx, sy, sw, sh, dx, dy, dw, dh, mode);
}
/**
* ( begin auto-generated from PImage_blend.xml )
*
* Blends a region of pixels into the image specified by the img
* parameter. These copies utilize full alpha channel support and a choice
* of the following modes to blend the colors of source pixels (A) with the
* ones of pixels in the destination image (B):
*
* BLEND - linear interpolation of colours: C = A*factor + B
*
* ADD - additive blending with white clip: C = min(A*factor + B, 255)
*
* SUBTRACT - subtractive blending with black clip: C = max(B - A*factor,
* 0)
*
* DARKEST - only the darkest colour succeeds: C = min(A*factor, B)
*
* LIGHTEST - only the lightest colour succeeds: C = max(A*factor, B)
*
* DIFFERENCE - subtract colors from underlying image.
*
* EXCLUSION - similar to DIFFERENCE, but less extreme.
*
* MULTIPLY - Multiply the colors, result will always be darker.
*
* SCREEN - Opposite multiply, uses inverse values of the colors.
*
* OVERLAY - A mix of MULTIPLY and SCREEN. Multiplies dark values,
* and screens light values.
*
* HARD_LIGHT - SCREEN when greater than 50% gray, MULTIPLY when lower.
*
* SOFT_LIGHT - Mix of DARKEST and LIGHTEST.
* Works like OVERLAY, but not as harsh.
*
* DODGE - Lightens light tones and increases contrast, ignores darks.
* Called "Color Dodge" in Illustrator and Photoshop.
*
* BURN - Darker areas are applied, increasing contrast, ignores lights.
* Called "Color Burn" in Illustrator and Photoshop.
*
* All modes use the alpha information (highest byte) of source image
* pixels as the blending factor. If the source and destination regions are
* different sizes, the image will be automatically resized to match the
* destination size. If the srcImg parameter is not used, the
* display window is used as the source image.
*
* As of release 0149, this function ignores imageMode().
*
* ( end auto-generated )
*
* @webref image:pixels
* @brief Copies a pixel or rectangle of pixels using different blending modes
* @param src an image variable referring to the source image
* @param sx X coordinate of the source's upper left corner
* @param sy Y coordinate of the source's upper left corner
* @param sw source image width
* @param sh source image height
* @param dx X coordinate of the destinations's upper left corner
* @param dy Y coordinate of the destinations's upper left corner
* @param dw destination image width
* @param dh destination image height
* @param mode Either BLEND, ADD, SUBTRACT, LIGHTEST, DARKEST, DIFFERENCE, EXCLUSION, MULTIPLY, SCREEN, OVERLAY, HARD_LIGHT, SOFT_LIGHT, DODGE, BURN
*
* @see PApplet#alpha(int)
* @see PImage#copy(PImage, int, int, int, int, int, int, int, int)
* @see PImage#blendColor(int,int,int)
*/
public void blend(PImage src,
int sx, int sy, int sw, int sh,
int dx, int dy, int dw, int dh, int mode) {
int sx2 = sx + sw;
int sy2 = sy + sh;
int dx2 = dx + dw;
int dy2 = dy + dh;
loadPixels();
if (src == this) {
if (intersect(sx, sy, sx2, sy2, dx, dy, dx2, dy2)) {
blit_resize(get(sx, sy, sw, sh),
0, 0, sw, sh,
pixels, pixelWidth, pixelHeight, dx, dy, dx2, dy2, mode);
} else {
// same as below, except skip the loadPixels() because it'd be redundant
blit_resize(src, sx, sy, sx2, sy2,
pixels, pixelWidth, pixelHeight, dx, dy, dx2, dy2, mode);
}
} else {
src.loadPixels();
blit_resize(src, sx, sy, sx2, sy2,
pixels, pixelWidth, pixelHeight, dx, dy, dx2, dy2, mode);
//src.updatePixels();
}
updatePixels();
}
/**
* Check to see if two rectangles intersect one another
*/
private boolean intersect(int sx1, int sy1, int sx2, int sy2,
int dx1, int dy1, int dx2, int dy2) {
int sw = sx2 - sx1 + 1;
int sh = sy2 - sy1 + 1;
int dw = dx2 - dx1 + 1;
int dh = dy2 - dy1 + 1;
if (dx1 < sx1) {
dw += dx1 - sx1;
if (dw > sw) {
dw = sw;
}
} else {
int w = sw + sx1 - dx1;
if (dw > w) {
dw = w;
}
}
if (dy1 < sy1) {
dh += dy1 - sy1;
if (dh > sh) {
dh = sh;
}
} else {
int h = sh + sy1 - dy1;
if (dh > h) {
dh = h;
}
}
return !(dw <= 0 || dh <= 0);
}
//////////////////////////////////////////////////////////////
/**
* Internal blitter/resizer/copier from toxi.
* Uses bilinear filtering if smooth() has been enabled
* 'mode' determines the blending mode used in the process.
*/
private void blit_resize(PImage img,
int srcX1, int srcY1, int srcX2, int srcY2,
int[] destPixels, int screenW, int screenH,
int destX1, int destY1, int destX2, int destY2,
int mode) {
if (srcX1 < 0) srcX1 = 0;
if (srcY1 < 0) srcY1 = 0;
if (srcX2 > img.pixelWidth) srcX2 = img.pixelWidth;
if (srcY2 > img.pixelHeight) srcY2 = img.pixelHeight;
int srcW = srcX2 - srcX1;
int srcH = srcY2 - srcY1;
int destW = destX2 - destX1;
int destH = destY2 - destY1;
boolean smooth = true; // may as well go with the smoothing these days
if (!smooth) {
srcW++; srcH++;
}
if (destW <= 0 || destH <= 0 ||
srcW <= 0 || srcH <= 0 ||
destX1 >= screenW || destY1 >= screenH ||
srcX1 >= img.pixelWidth || srcY1 >= img.pixelHeight) {
return;
}
int dx = (int) (srcW / (float) destW * PRECISIONF);
int dy = (int) (srcH / (float) destH * PRECISIONF);
srcXOffset = destX1 < 0 ? -destX1 * dx : srcX1 * PRECISIONF;
srcYOffset = destY1 < 0 ? -destY1 * dy : srcY1 * PRECISIONF;
if (destX1 < 0) {
destW += destX1;
destX1 = 0;
}
if (destY1 < 0) {
destH += destY1;
destY1 = 0;
}
destW = min(destW, screenW - destX1);
destH = min(destH, screenH - destY1);
int destOffset = destY1 * screenW + destX1;
srcBuffer = img.pixels;
if (smooth) {
// use bilinear filtering
iw = img.pixelWidth;
iw1 = img.pixelWidth - 1;
ih1 = img.pixelHeight - 1;
switch (mode) {
case BLEND:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
// davbol - renamed old blend_multiply to blend_blend
destPixels[destOffset + x] =
blend_blend(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case ADD:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_add_pin(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SUBTRACT:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_sub_pin(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case LIGHTEST:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_lightest(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case DARKEST:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_darkest(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case REPLACE:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] = filter_bilinear();
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case DIFFERENCE:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_difference(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case EXCLUSION:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_exclusion(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case MULTIPLY:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_multiply(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SCREEN:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_screen(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case OVERLAY:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_overlay(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case HARD_LIGHT:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_hard_light(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SOFT_LIGHT:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_soft_light(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
// davbol - proposed 2007-01-09
case DODGE:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_dodge(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case BURN:
for (int y = 0; y < destH; y++) {
filter_new_scanline();
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_burn(destPixels[destOffset + x], filter_bilinear());
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
}
} else {
// nearest neighbour scaling (++fast!)
switch (mode) {
case BLEND:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
// davbol - renamed old blend_multiply to blend_blend
destPixels[destOffset + x] =
blend_blend(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case ADD:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_add_pin(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SUBTRACT:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_sub_pin(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case LIGHTEST:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_lightest(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case DARKEST:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_darkest(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case REPLACE:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] = srcBuffer[sY + (sX >> PRECISIONB)];
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case DIFFERENCE:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_difference(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case EXCLUSION:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_exclusion(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case MULTIPLY:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_multiply(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SCREEN:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_screen(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case OVERLAY:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_overlay(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case HARD_LIGHT:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_hard_light(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case SOFT_LIGHT:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_soft_light(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
// davbol - proposed 2007-01-09
case DODGE:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_dodge(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
case BURN:
for (int y = 0; y < destH; y++) {
sX = srcXOffset;
sY = (srcYOffset >> PRECISIONB) * img.pixelWidth;
for (int x = 0; x < destW; x++) {
destPixels[destOffset + x] =
blend_burn(destPixels[destOffset + x],
srcBuffer[sY + (sX >> PRECISIONB)]);
sX += dx;
}
destOffset += screenW;
srcYOffset += dy;
}
break;
}
}
}
private void filter_new_scanline() {
sX = srcXOffset;
fracV = srcYOffset & PREC_MAXVAL;
ifV = PREC_MAXVAL - fracV + 1;
v1 = (srcYOffset >> PRECISIONB) * iw;
v2 = min((srcYOffset >> PRECISIONB) + 1, ih1) * iw;
}
private int filter_bilinear() {
fracU = sX & PREC_MAXVAL;
ifU = PREC_MAXVAL - fracU + 1;
ul = (ifU * ifV) >> PRECISIONB;
ll = ifU - ul;
ur = ifV - ul;
lr = PREC_MAXVAL + 1 - ul - ll - ur;
u1 = (sX >> PRECISIONB);
u2 = min(u1 + 1, iw1);
// get color values of the 4 neighbouring texels
cUL = srcBuffer[v1 + u1];
cUR = srcBuffer[v1 + u2];
cLL = srcBuffer[v2 + u1];
cLR = srcBuffer[v2 + u2];
r = ((ul*((cUL&RED_MASK)>>16) + ll*((cLL&RED_MASK)>>16) +
ur*((cUR&RED_MASK)>>16) + lr*((cLR&RED_MASK)>>16))
<< PREC_RED_SHIFT) & RED_MASK;
g = ((ul*(cUL&GREEN_MASK) + ll*(cLL&GREEN_MASK) +
ur*(cUR&GREEN_MASK) + lr*(cLR&GREEN_MASK))
>>> PRECISIONB) & GREEN_MASK;
b = (ul*(cUL&BLUE_MASK) + ll*(cLL&BLUE_MASK) +
ur*(cUR&BLUE_MASK) + lr*(cLR&BLUE_MASK))
>>> PRECISIONB;
a = ((ul*((cUL&ALPHA_MASK)>>>24) + ll*((cLL&ALPHA_MASK)>>>24) +
ur*((cUR&ALPHA_MASK)>>>24) + lr*((cLR&ALPHA_MASK)>>>24))
<< PREC_ALPHA_SHIFT) & ALPHA_MASK;
return a | r | g | b;
}
//////////////////////////////////////////////////////////////
// internal blending methods
private static int min(int a, int b) {
return (a < b) ? a : b;
}
private static int max(int a, int b) {
return (a > b) ? a : b;
}
/////////////////////////////////////////////////////////////
// BLEND MODE IMPLEMENTATIONS
/*
* Jakub Valtar
*
* All modes use SRC alpha to interpolate between DST and the result of
* the operation:
*
* R = (1 - SRC_ALPHA) * DST + SRC_ALPHA *
*
* Comments above each mode only specify the formula of its operation.
*
* These implementations treat alpha 127 (=255/2) as a perfect 50 % mix.
*
* One alpha value between 126 and 127 is intentionally left out,
* so the step 126 -> 127 is twice as big compared to other steps.
* This is because our colors are in 0..255 range, but we divide
* by right shifting 8 places (=256) which is much faster than
* (correct) float division by 255.0f. The missing value was placed
* between 126 and 127, because limits of the range (near 0 and 255) and
* the middle value (127) have to blend correctly.
*
* Below you will often see RED and BLUE channels (RB) manipulated together
* and GREEN channel (GN) manipulated separately. It is sometimes possible
* because the operation won't use more than 16 bits, so we process the RED
* channel in the upper 16 bits and BLUE channel in the lower 16 bits. This
* decreases the number of operations per pixel and thus makes things faster.
*
* Some of the modes are hand tweaked (various +1s etc.) to be more accurate
* and to produce correct values in extremes. Below is a sketch you can use
* to check any blending function for
*
* 1) Discrepancies between color channels:
* - highlighted by the offending color
* 2) Behavior at extremes (set colorCount to 256):
* - values of all corners are printed to the console
* 3) Rounding errors:
* - set colorCount to lower value to better see color bands
*
// use powers of 2 in range 2..256
// to better see color bands
final int colorCount = 256;
final int blockSize = 3;
void settings() {
size(blockSize * 256, blockSize * 256);
}
void setup() { }
void draw() {
noStroke();
colorMode(RGB, colorCount-1);
int alpha = (mouseX / blockSize) << 24;
int r, g, b, r2, g2, b2 = 0;
for (int x = 0; x <= 0xFF; x++) {
for (int y = 0; y <= 0xFF; y++) {
int dst = (x << 16) | (x << 8) | x;
int src = (y << 16) | (y << 8) | y | alpha;
int result = testFunction(dst, src);
r = r2 = (result >> 16 & 0xFF);
g = g2 = (result >> 8 & 0xFF);
b = b2 = (result >> 0 & 0xFF);
if (r != g && r != b) r2 = (128 + r2) % 255;
if (g != r && g != b) g2 = (128 + g2) % 255;
if (b != r && b != g) b2 = (128 + b2) % 255;
fill(r2 % colorCount, g2 % colorCount, b2 % colorCount);
rect(x * blockSize, y * blockSize, blockSize, blockSize);
}
}
println(
"alpha:", mouseX/blockSize,
"TL:", hex(get(0, 0)),
"TR:", hex(get(width-1, 0)),
"BR:", hex(get(width-1, height-1)),
"BL:", hex(get(0, height-1)));
}
int testFunction(int dst, int src) {
// your function here
return dst;
}
*
*
*/
private static final int RB_MASK = 0x00FF00FF;
private static final int GN_MASK = 0x0000FF00;
/**
* Blend
* O = S
*/
private static int blend_blend(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + (src & RB_MASK) * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + (src & GN_MASK) * s_a) >>> 8 & GN_MASK;
}
/**
* Add
* O = MIN(D + S, 1)
*/
private static int blend_add_pin(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int rb = (dst & RB_MASK) + ((src & RB_MASK) * s_a >>> 8 & RB_MASK);
int gn = (dst & GN_MASK) + ((src & GN_MASK) * s_a >>> 8);
return min((dst >>> 24) + a, 0xFF) << 24 |
min(rb & 0xFFFF0000, RED_MASK) |
min(gn & 0x00FFFF00, GREEN_MASK) |
min(rb & 0x0000FFFF, BLUE_MASK);
}
/**
* Subtract
* O = MAX(0, D - S)
*/
private static int blend_sub_pin(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int rb = ((src & RB_MASK) * s_a >>> 8);
int gn = ((src & GREEN_MASK) * s_a >>> 8);
return min((dst >>> 24) + a, 0xFF) << 24 |
max((dst & RED_MASK) - (rb & RED_MASK), 0) |
max((dst & GREEN_MASK) - (gn & GREEN_MASK), 0) |
max((dst & BLUE_MASK) - (rb & BLUE_MASK), 0);
}
/**
* Lightest
* O = MAX(D, S)
*/
private static int blend_lightest(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int rb = max(src & RED_MASK, dst & RED_MASK) |
max(src & BLUE_MASK, dst & BLUE_MASK);
int gn = max(src & GREEN_MASK, dst & GREEN_MASK);
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + gn * s_a) >>> 8 & GN_MASK;
}
/**
* Darkest
* O = MIN(D, S)
*/
private static int blend_darkest(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int rb = min(src & RED_MASK, dst & RED_MASK) |
min(src & BLUE_MASK, dst & BLUE_MASK);
int gn = min(src & GREEN_MASK, dst & GREEN_MASK);
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + gn * s_a) >>> 8 & GN_MASK;
}
/**
* Difference
* O = ABS(D - S)
*/
private static int blend_difference(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int r = (dst & RED_MASK) - (src & RED_MASK);
int b = (dst & BLUE_MASK) - (src & BLUE_MASK);
int g = (dst & GREEN_MASK) - (src & GREEN_MASK);
int rb = (r < 0 ? -r : r) |
(b < 0 ? -b : b);
int gn = (g < 0 ? -g : g);
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + gn * s_a) >>> 8 & GN_MASK;
}
/**
* Exclusion
* O = (1 - S)D + S(1 - D)
* O = D + S - 2DS
*/
private static int blend_exclusion(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_rb = dst & RB_MASK;
int d_gn = dst & GN_MASK;
int s_gn = src & GN_MASK;
int f_r = (dst & RED_MASK) >> 16;
int f_b = (dst & BLUE_MASK);
int rb_sub =
((src & RED_MASK) * (f_r + (f_r >= 0x7F ? 1 : 0)) |
(src & BLUE_MASK) * (f_b + (f_b >= 0x7F ? 1 : 0)))
>>> 7 & 0x01FF01FF;
int gn_sub = s_gn * (d_gn + (d_gn >= 0x7F00 ? 0x100 : 0))
>>> 15 & 0x0001FF00;
return min((dst >>> 24) + a, 0xFF) << 24 |
(d_rb * d_a + (d_rb + (src & RB_MASK) - rb_sub) * s_a) >>> 8 & RB_MASK |
(d_gn * d_a + (d_gn + s_gn - gn_sub) * s_a) >>> 8 & GN_MASK;
}
/*
* Multiply
* O = DS
*/
private static int blend_multiply(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_gn = dst & GN_MASK;
int f_r = (dst & RED_MASK) >> 16;
int f_b = (dst & BLUE_MASK);
int rb =
((src & RED_MASK) * (f_r + 1) |
(src & BLUE_MASK) * (f_b + 1))
>>> 8 & RB_MASK;
int gn =
(src & GREEN_MASK) * (d_gn + 0x100)
>>> 16 & GN_MASK;
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
(d_gn * d_a + gn * s_a) >>> 8 & GN_MASK;
}
/**
* Screen
* O = 1 - (1 - D)(1 - S)
* O = D + S - DS
*/
private static int blend_screen(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_rb = dst & RB_MASK;
int d_gn = dst & GN_MASK;
int s_gn = src & GN_MASK;
int f_r = (dst & RED_MASK) >> 16;
int f_b = (dst & BLUE_MASK);
int rb_sub =
((src & RED_MASK) * (f_r + 1) |
(src & BLUE_MASK) * (f_b + 1))
>>> 8 & RB_MASK;
int gn_sub = s_gn * (d_gn + 0x100)
>>> 16 & GN_MASK;
return min((dst >>> 24) + a, 0xFF) << 24 |
(d_rb * d_a + (d_rb + (src & RB_MASK) - rb_sub) * s_a) >>> 8 & RB_MASK |
(d_gn * d_a + (d_gn + s_gn - gn_sub) * s_a) >>> 8 & GN_MASK;
}
/**
* Overlay
* O = 2 * MULTIPLY(D, S) = 2DS for D < 0.5
* O = 2 * SCREEN(D, S) - 1 = 2(S + D - DS) - 1 otherwise
*/
private static int blend_overlay(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_r = dst & RED_MASK;
int d_g = dst & GREEN_MASK;
int d_b = dst & BLUE_MASK;
int s_r = src & RED_MASK;
int s_g = src & GREEN_MASK;
int s_b = src & BLUE_MASK;
int r = (d_r < 0x800000) ?
d_r * ((s_r >>> 16) + 1) >>> 7 :
0xFF0000 - ((0x100 - (s_r >>> 16)) * (RED_MASK - d_r) >>> 7);
int g = (d_g < 0x8000) ?
d_g * (s_g + 0x100) >>> 15 :
(0xFF00 - ((0x10000 - s_g) * (GREEN_MASK - d_g) >>> 15));
int b = (d_b < 0x80) ?
d_b * (s_b + 1) >>> 7 :
(0xFF00 - ((0x100 - s_b) * (BLUE_MASK - d_b) << 1)) >>> 8;
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + ((r | b) & RB_MASK) * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + (g & GN_MASK) * s_a) >>> 8 & GN_MASK;
}
/**
* Hard Light
* O = OVERLAY(S, D)
*
* O = 2 * MULTIPLY(D, S) = 2DS for S < 0.5
* O = 2 * SCREEN(D, S) - 1 = 2(S + D - DS) - 1 otherwise
*/
private static int blend_hard_light(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_r = dst & RED_MASK;
int d_g = dst & GREEN_MASK;
int d_b = dst & BLUE_MASK;
int s_r = src & RED_MASK;
int s_g = src & GREEN_MASK;
int s_b = src & BLUE_MASK;
int r = (s_r < 0x800000) ?
s_r * ((d_r >>> 16) + 1) >>> 7 :
0xFF0000 - ((0x100 - (d_r >>> 16)) * (RED_MASK - s_r) >>> 7);
int g = (s_g < 0x8000) ?
s_g * (d_g + 0x100) >>> 15 :
(0xFF00 - ((0x10000 - d_g) * (GREEN_MASK - s_g) >>> 15));
int b = (s_b < 0x80) ?
s_b * (d_b + 1) >>> 7 :
(0xFF00 - ((0x100 - d_b) * (BLUE_MASK - s_b) << 1)) >>> 8;
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + ((r | b) & RB_MASK) * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + (g & GN_MASK) * s_a) >>> 8 & GN_MASK;
}
/**
* Soft Light (Pegtop)
* O = (1 - D) * MULTIPLY(D, S) + D * SCREEN(D, S)
* O = (1 - D) * DS + D * (1 - (1 - D)(1 - S))
* O = 2DS + DD - 2DDS
*/
private static int blend_soft_light(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int d_r = dst & RED_MASK;
int d_g = dst & GREEN_MASK;
int d_b = dst & BLUE_MASK;
int s_r1 = src & RED_MASK >> 16;
int s_g1 = src & GREEN_MASK >> 8;
int s_b1 = src & BLUE_MASK;
int d_r1 = (d_r >> 16) + (s_r1 < 7F ? 1 : 0);
int d_g1 = (d_g >> 8) + (s_g1 < 7F ? 1 : 0);
int d_b1 = d_b + (s_b1 < 7F ? 1 : 0);
int r = (s_r1 * d_r >> 7) + 0xFF * d_r1 * (d_r1 + 1) -
((s_r1 * d_r1 * d_r1) << 1) & RED_MASK;
int g = (s_g1 * d_g << 1) + 0xFF * d_g1 * (d_g1 + 1) -
((s_g1 * d_g1 * d_g1) << 1) >>> 8 & GREEN_MASK;
int b = (s_b1 * d_b << 9) + 0xFF * d_b1 * (d_b1 + 1) -
((s_b1 * d_b1 * d_b1) << 1) >>> 16;
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + (r | b) * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + g * s_a) >>> 8 & GN_MASK;
}
/**
* Dodge
* O = D / (1 - S)
*/
private static int blend_dodge(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int r = (dst & RED_MASK) / (256 - ((src & RED_MASK) >> 16));
int g = ((dst & GREEN_MASK) << 8) / (256 - ((src & GREEN_MASK) >> 8));
int b = ((dst & BLUE_MASK) << 8) / (256 - (src & BLUE_MASK));
int rb =
(r > 0xFF00 ? 0xFF0000 : ((r << 8) & RED_MASK)) |
(b > 0x00FF ? 0x0000FF : b);
int gn =
(g > 0xFF00 ? 0x00FF00 : (g & GREEN_MASK));
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + gn * s_a) >>> 8 & GN_MASK;
}
/**
* Burn
* O = 1 - (1 - A) / B
*/
private static int blend_burn(int dst, int src) {
int a = src >>> 24;
int s_a = a + (a >= 0x7F ? 1 : 0);
int d_a = 0x100 - s_a;
int r = ((0xFF0000 - (dst & RED_MASK))) / (1 + (src & RED_MASK >> 16));
int g = ((0x00FF00 - (dst & GREEN_MASK)) << 8) / (1 + (src & GREEN_MASK >> 8));
int b = ((0x0000FF - (dst & BLUE_MASK)) << 8) / (1 + (src & BLUE_MASK));
int rb = RB_MASK -
(r > 0xFF00 ? 0xFF0000 : ((r << 8) & RED_MASK)) -
(b > 0x00FF ? 0x0000FF : b);
int gn = GN_MASK -
(g > 0xFF00 ? 0x00FF00 : (g & GREEN_MASK));
return min((dst >>> 24) + a, 0xFF) << 24 |
((dst & RB_MASK) * d_a + rb * s_a) >>> 8 & RB_MASK |
((dst & GN_MASK) * d_a + gn * s_a) >>> 8 & GN_MASK;
}
//////////////////////////////////////////////////////////////
// FILE I/O
static byte TIFF_HEADER[] = {
77, 77, 0, 42, 0, 0, 0, 8, 0, 9, 0, -2, 0, 4, 0, 0, 0, 1, 0, 0,
0, 0, 1, 0, 0, 3, 0, 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 3, 0, 0, 0, 1,
0, 0, 0, 0, 1, 2, 0, 3, 0, 0, 0, 3, 0, 0, 0, 122, 1, 6, 0, 3, 0,
0, 0, 1, 0, 2, 0, 0, 1, 17, 0, 4, 0, 0, 0, 1, 0, 0, 3, 0, 1, 21,
0, 3, 0, 0, 0, 1, 0, 3, 0, 0, 1, 22, 0, 3, 0, 0, 0, 1, 0, 0, 0, 0,
1, 23, 0, 4, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 0, 8, 0, 8
};
static final String TIFF_ERROR =
"Error: Processing can only read its own TIFF files.";
static protected PImage loadTIFF(byte tiff[]) {
if ((tiff[42] != tiff[102]) || // width/height in both places
(tiff[43] != tiff[103])) {
System.err.println(TIFF_ERROR);
return null;
}
int width =
((tiff[30] & 0xff) << 8) | (tiff[31] & 0xff);
int height =
((tiff[42] & 0xff) << 8) | (tiff[43] & 0xff);
int count =
((tiff[114] & 0xff) << 24) |
((tiff[115] & 0xff) << 16) |
((tiff[116] & 0xff) << 8) |
(tiff[117] & 0xff);
if (count != width * height * 3) {
System.err.println(TIFF_ERROR + " (" + width + ", " + height +")");
return null;
}
// check the rest of the header
for (int i = 0; i < TIFF_HEADER.length; i++) {
if ((i == 30) || (i == 31) || (i == 42) || (i == 43) ||
(i == 102) || (i == 103) ||
(i == 114) || (i == 115) || (i == 116) || (i == 117)) continue;
if (tiff[i] != TIFF_HEADER[i]) {
System.err.println(TIFF_ERROR + " (" + i + ")");
return null;
}
}
PImage outgoing = new PImage(width, height, RGB);
int index = 768;
count /= 3;
for (int i = 0; i < count; i++) {
outgoing.pixels[i] =
0xFF000000 |
(tiff[index++] & 0xff) << 16 |
(tiff[index++] & 0xff) << 8 |
(tiff[index++] & 0xff);
}
return outgoing;
}
protected boolean saveTIFF(OutputStream output) {
// shutting off the warning, people can figure this out themselves
/*
if (format != RGB) {
System.err.println("Warning: only RGB information is saved with " +
".tif files. Use .tga or .png for ARGB images and others.");
}
*/
try {
byte tiff[] = new byte[768];
System.arraycopy(TIFF_HEADER, 0, tiff, 0, TIFF_HEADER.length);
tiff[30] = (byte) ((pixelWidth >> 8) & 0xff);
tiff[31] = (byte) ((pixelWidth) & 0xff);
tiff[42] = tiff[102] = (byte) ((pixelHeight >> 8) & 0xff);
tiff[43] = tiff[103] = (byte) ((pixelHeight) & 0xff);
int count = pixelWidth*pixelHeight*3;
tiff[114] = (byte) ((count >> 24) & 0xff);
tiff[115] = (byte) ((count >> 16) & 0xff);
tiff[116] = (byte) ((count >> 8) & 0xff);
tiff[117] = (byte) ((count) & 0xff);
// spew the header to the disk
output.write(tiff);
for (int i = 0; i < pixels.length; i++) {
output.write((pixels[i] >> 16) & 0xff);
output.write((pixels[i] >> 8) & 0xff);
output.write(pixels[i] & 0xff);
}
output.flush();
return true;
} catch (IOException e) {
e.printStackTrace();
}
return false;
}
/**
* Creates a Targa32 formatted byte sequence of specified
* pixel buffer using RLE compression.
*
* Also figured out how to avoid parsing the image upside-down
* (there's a header flag to set the image origin to top-left)
*
* Starting with revision 0092, the format setting is taken into account:
*
* - ALPHA images written as 8bit grayscale (uses lowest byte)
*
- RGB → 24 bits
*
- ARGB → 32 bits
*
* All versions are RLE compressed.
*
* Contributed by toxi 8-10 May 2005, based on this RLE
* specification
*/
protected boolean saveTGA(OutputStream output) {
byte header[] = new byte[18];
if (format == ALPHA) { // save ALPHA images as 8bit grayscale
header[2] = 0x0B;
header[16] = 0x08;
header[17] = 0x28;
} else if (format == RGB) {
header[2] = 0x0A;
header[16] = 24;
header[17] = 0x20;
} else if (format == ARGB) {
header[2] = 0x0A;
header[16] = 32;
header[17] = 0x28;
} else {
throw new RuntimeException("Image format not recognized inside save()");
}
// set image dimensions lo-hi byte order
header[12] = (byte) (pixelWidth & 0xff);
header[13] = (byte) (pixelWidth >> 8);
header[14] = (byte) (pixelHeight & 0xff);
header[15] = (byte) (pixelHeight >> 8);
try {
output.write(header);
int maxLen = pixelHeight * pixelWidth;
int index = 0;
int col; //, prevCol;
int[] currChunk = new int[128];
// 8bit image exporter is in separate loop
// to avoid excessive conditionals...
if (format == ALPHA) {
while (index < maxLen) {
boolean isRLE = false;
int rle = 1;
currChunk[0] = col = pixels[index] & 0xff;
while (index + rle < maxLen) {
if (col != (pixels[index + rle]&0xff) || rle == 128) {
isRLE = (rle > 1);
break;
}
rle++;
}
if (isRLE) {
output.write(0x80 | (rle - 1));
output.write(col);
} else {
rle = 1;
while (index + rle < maxLen) {
int cscan = pixels[index + rle] & 0xff;
if ((col != cscan && rle < 128) || rle < 3) {
currChunk[rle] = col = cscan;
} else {
if (col == cscan) rle -= 2;
break;
}
rle++;
}
output.write(rle - 1);
for (int i = 0; i < rle; i++) output.write(currChunk[i]);
}
index += rle;
}
} else { // export 24/32 bit TARGA
while (index < maxLen) {
boolean isRLE = false;
currChunk[0] = col = pixels[index];
int rle = 1;
// try to find repeating bytes (min. len = 2 pixels)
// maximum chunk size is 128 pixels
while (index + rle < maxLen) {
if (col != pixels[index + rle] || rle == 128) {
isRLE = (rle > 1); // set flag for RLE chunk
break;
}
rle++;
}
if (isRLE) {
output.write(128 | (rle - 1));
output.write(col & 0xff);
output.write(col >> 8 & 0xff);
output.write(col >> 16 & 0xff);
if (format == ARGB) output.write(col >>> 24 & 0xff);
} else { // not RLE
rle = 1;
while (index + rle < maxLen) {
if ((col != pixels[index + rle] && rle < 128) || rle < 3) {
currChunk[rle] = col = pixels[index + rle];
} else {
// check if the exit condition was the start of
// a repeating colour
if (col == pixels[index + rle]) rle -= 2;
break;
}
rle++;
}
// write uncompressed chunk
output.write(rle - 1);
if (format == ARGB) {
for (int i = 0; i < rle; i++) {
col = currChunk[i];
output.write(col & 0xff);
output.write(col >> 8 & 0xff);
output.write(col >> 16 & 0xff);
output.write(col >>> 24 & 0xff);
}
} else {
for (int i = 0; i < rle; i++) {
col = currChunk[i];
output.write(col & 0xff);
output.write(col >> 8 & 0xff);
output.write(col >> 16 & 0xff);
}
}
}
index += rle;
}
}
output.flush();
return true;
} catch (IOException e) {
e.printStackTrace();
return false;
}
}
/**
* Use ImageIO functions from Java 1.4 and later to handle image save.
* Various formats are supported, typically jpeg, png, bmp, and wbmp.
* To get a list of the supported formats for writing, use:
* println(javax.imageio.ImageIO.getReaderFormatNames())
*/
protected boolean saveImageIO(String path) throws IOException {
try {
int outputFormat = (format == ARGB) ?
BufferedImage.TYPE_INT_ARGB : BufferedImage.TYPE_INT_RGB;
String extension =
path.substring(path.lastIndexOf('.') + 1).toLowerCase();
// JPEG and BMP images that have an alpha channel set get pretty unhappy.
// BMP just doesn't write, and JPEG writes it as a CMYK image.
// http://code.google.com/p/processing/issues/detail?id=415
if (extension.equals("bmp") || extension.equals("jpg") || extension.equals("jpeg")) {
outputFormat = BufferedImage.TYPE_INT_RGB;
}
BufferedImage bimage = new BufferedImage(pixelWidth, pixelHeight, outputFormat);
bimage.setRGB(0, 0, pixelWidth, pixelHeight, pixels, 0, pixelWidth);
File file = new File(path);
ImageWriter writer = null;
ImageWriteParam param = null;
IIOMetadata metadata = null;
if (extension.equals("jpg") || extension.equals("jpeg")) {
if ((writer = imageioWriter("jpeg")) != null) {
// Set JPEG quality to 90% with baseline optimization. Setting this
// to 1 was a huge jump (about triple the size), so this seems good.
// Oddly, a smaller file size than Photoshop at 90%, but I suppose
// it's a completely different algorithm.
param = writer.getDefaultWriteParam();
param.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
param.setCompressionQuality(0.9f);
}
}
if (extension.equals("png")) {
if ((writer = imageioWriter("png")) != null) {
param = writer.getDefaultWriteParam();
if (false) {
metadata = imageioDPI(writer, param, 100);
}
}
}
if (writer != null) {
BufferedOutputStream output =
new BufferedOutputStream(PApplet.createOutput(file));
writer.setOutput(ImageIO.createImageOutputStream(output));
// writer.write(null, new IIOImage(bimage, null, null), param);
writer.write(metadata, new IIOImage(bimage, null, metadata), param);
writer.dispose();
output.flush();
output.close();
return true;
}
// If iter.hasNext() somehow fails up top, it falls through to here
return javax.imageio.ImageIO.write(bimage, extension, file);
} catch (Exception e) {
e.printStackTrace();
throw new IOException("image save failed.");
}
}
private ImageWriter imageioWriter(String extension) {
Iterator iter = ImageIO.getImageWritersByFormatName(extension);
if (iter.hasNext()) {
return iter.next();
}
return null;
}
private IIOMetadata imageioDPI(ImageWriter writer, ImageWriteParam param, double dpi) {
// http://stackoverflow.com/questions/321736/how-to-set-dpi-information-in-an-image
ImageTypeSpecifier typeSpecifier =
ImageTypeSpecifier.createFromBufferedImageType(BufferedImage.TYPE_INT_RGB);
IIOMetadata metadata =
writer.getDefaultImageMetadata(typeSpecifier, param);
if (!metadata.isReadOnly() && metadata.isStandardMetadataFormatSupported()) {
// for PNG, it's dots per millimeter
double dotsPerMilli = dpi / 25.4;
IIOMetadataNode horiz = new IIOMetadataNode("HorizontalPixelSize");
horiz.setAttribute("value", Double.toString(dotsPerMilli));
IIOMetadataNode vert = new IIOMetadataNode("VerticalPixelSize");
vert.setAttribute("value", Double.toString(dotsPerMilli));
IIOMetadataNode dim = new IIOMetadataNode("Dimension");
dim.appendChild(horiz);
dim.appendChild(vert);
IIOMetadataNode root = new IIOMetadataNode("javax_imageio_1.0");
root.appendChild(dim);
try {
metadata.mergeTree("javax_imageio_1.0", root);
return metadata;
} catch (IIOInvalidTreeException e) {
System.err.println("Could not set the DPI of the output image");
e.printStackTrace();
}
}
return null;
}
protected String[] saveImageFormats;
/**
* ( begin auto-generated from PImage_save.xml )
*
* Saves the image into a file. Images are saved in TIFF, TARGA, JPEG, and
* PNG format depending on the extension within the filename
* parameter. For example, "image.tif" will have a TIFF image and
* "image.png" will save a PNG image. If no extension is included in the
* filename, the image will save in TIFF format and .tif will be
* added to the name. These files are saved to the sketch's folder, which
* may be opened by selecting "Show sketch folder" from the "Sketch" menu.
* It is not possible to use save() while running the program in a
* web browser.
To save an image created within the code, rather
* than through loading, it's necessary to make the image with the
* createImage() function so it is aware of the location of the
* program and can therefore save the file to the right place. See the
* createImage() reference for more information.
*
* ( end auto-generated )
* Advanced
* Save this image to disk.
*
* As of revision 0100, this function requires an absolute path,
* in order to avoid confusion. To save inside the sketch folder,
* use the function savePath() from PApplet, or use saveFrame() instead.
* As of revision 0116, savePath() is not needed if this object has been
* created (as recommended) via createImage() or createGraphics() or
* one of its neighbors.
*
* As of revision 0115, when using Java 1.4 and later, you can write
* to several formats besides tga and tiff. If Java 1.4 is installed
* and the extension used is supported (usually png, jpg, jpeg, bmp,
* and tiff), then those methods will be used to write the image.
* To get a list of the supported formats for writing, use:
* println(javax.imageio.ImageIO.getReaderFormatNames())
*
* To use the original built-in image writers, use .tga or .tif as the
* extension, or don't include an extension. When no extension is used,
* the extension .tif will be added to the file name.
*
* The ImageIO API claims to support wbmp files, however they probably
* require a black and white image. Basic testing produced a zero-length
* file with no error.
*
* @webref pimage:method
* @brief Saves the image to a TIFF, TARGA, PNG, or JPEG file
* @usage application
* @param filename a sequence of letters and numbers
*/
public boolean save(String filename) { // ignore
boolean success = false;
if (parent != null) {
// use savePath(), so that the intermediate directories are created
filename = parent.savePath(filename);
} else {
File file = new File(filename);
if (file.isAbsolute()) {
// make sure that the intermediate folders have been created
PApplet.createPath(file);
} else {
String msg =
"PImage.save() requires an absolute path. " +
"Use createImage(), or pass savePath() to save().";
PGraphics.showException(msg);
}
}
// Make sure the pixel data is ready to go
loadPixels();
try {
OutputStream os = null;
if (saveImageFormats == null) {
saveImageFormats = javax.imageio.ImageIO.getWriterFormatNames();
}
if (saveImageFormats != null) {
for (int i = 0; i < saveImageFormats.length; i++) {
if (filename.endsWith("." + saveImageFormats[i])) {
if (!saveImageIO(filename)) {
System.err.println("Error while saving image.");
return false;
}
return true;
}
}
}
if (filename.toLowerCase().endsWith(".tga")) {
os = new BufferedOutputStream(new FileOutputStream(filename), 32768);
success = saveTGA(os); //, pixels, width, height, format);
} else {
if (!filename.toLowerCase().endsWith(".tif") &&
!filename.toLowerCase().endsWith(".tiff")) {
// if no .tif extension, add it..
filename += ".tif";
}
os = new BufferedOutputStream(new FileOutputStream(filename), 32768);
success = saveTIFF(os); //, pixels, width, height);
}
os.flush();
os.close();
} catch (IOException e) {
System.err.println("Error while saving image.");
e.printStackTrace();
success = false;
}
return success;
}
}